dmesg - Intel Core i5 2500K
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
BIOS-e820: 0000000040200000 - 00000000cac0d000 (usable)
BIOS-e820: 00000000cac0d000 - 00000000cacbf000 (reserved)
BIOS-e820: 00000000cacbf000 - 00000000cafd1000 (ACPI NVS)
BIOS-e820: 00000000cafd1000 - 00000000cafff000 (ACPI data)
BIOS-e820: 00000000cafff000 - 00000000cb000000 (usable)
BIOS-e820: 00000000cb000000 - 00000000cfa00000 (reserved)
BIOS-e820: 00000000f8000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000042f600000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: /DZ77GA, BIOS GAZ7710H.86A.3254.R11.1204111035 04/11/2012
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x42f600 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0CFA00000 mask FFFE00000 uncachable
1 base 0CFC00000 mask FFFC00000 uncachable
2 base 0D0000000 mask FF0000000 uncachable
3 base 0E0000000 mask FF0000000 uncachable
4 base 0F0000000 mask FF8000000 uncachable
5 base 0F8000000 mask FFC000000 uncachable
6 base 0FC000000 mask FFE000000 uncachable
7 base 0FE000000 mask FFF000000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xcb000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
init_memory_mapping: 0000000000000000-00000000cb000000
0000000000 - 00cb000000 page 2M
kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
init_memory_mapping: 0000000100000000-000000042f600000
0100000000 - 042f600000 page 2M
kernel direct mapping tables up to 42f600000 @ cabfb000-cac0d000
RAMDISK: 364e6000 - 3726b000
ACPI: RSDP 00000000000f0410 00024 (v02 INTEL )
ACPI: XSDT 00000000caffe120 00074 (v01 INTEL DZ77GA 00000000 01000013)
ACPI: FACP 00000000caffc000 000F4 (v03 INTEL DZ77GA 00000000 MSFT 0000005F)
ACPI: DSDT 00000000caff2000 06CA7 (v02 INTEL DZ77GA 00000000 INTL 20100331)
ACPI: FACS 00000000cafbd000 00040
ACPI: UEFI 00000000cafc5000 00042 (v01 00000000 00000000)
ACPI: DBGP 00000000caffd000 00034 (v01 INTEL DZ77GA 00000000 MSFT 0000005F)
ACPI: HPET 00000000caffb000 00038 (v01 INTEL DZ77GA 00000001 MSFT 0000005F)
ACPI: APIC 00000000caffa000 000BC (v01 INTEL DZ77GA 00000001 MSFT 0000005F)
ACPI: MCFG 00000000caff9000 0003C (v01 INTEL DZ77GA 00000001 MSFT 0000005F)
ACPI: SSDT 00000000caff1000 00882 (v01 INTEL Gpe_IaPc 00001000 INTL 20100331)
ACPI: BOOT 00000000cafed000 00028 (v01 INTEL TIANO 00000002 MSFT 01000013)
ACPI: SSDT 00000000cafec000 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20100331)
ACPI: SSDT 00000000cafeb000 00A92 (v01 PmRef CpuPm 00003000 INTL 20100331)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000042f600000
Initmem setup node 0 0000000000000000-000000042f600000
NODE_DATA [000000042f5fb000 - 000000042f5fffff]
[ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041ec00000-ffff88042ebfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0042f600
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x00020000
0: 0x00020200 -> 0x00040000
0: 0x00040200 -> 0x000cac0d
0: 0x000cafff -> 0x000cb000
0: 0x00100000 -> 0x0042f600
On node 0 totalpages: 4169115
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 809038 pages, LIFO batch:31
Normal zone: 52184 pages used for memmap
Normal zone: 3287592 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040000000 - 0000000040200000
PM: Registered nosave memory: 00000000cac0d000 - 00000000cacbf000
PM: Registered nosave memory: 00000000cacbf000 - 00000000cafd1000
PM: Registered nosave memory: 00000000cafd1000 - 00000000cafff000
PM: Registered nosave memory: 00000000cb000000 - 00000000cfa00000
PM: Registered nosave memory: 00000000cfa00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 0000000100000000
Allocating PCI resources starting at cfa00000 (gap: cfa00000:28600000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88042f200000 s83072 r8192 d23424 u262144
pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4100542
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16317632k/17553408k available (6566k kernel code, 876948k absent, 358828k reserved, 6637k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3292.564 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.12 BogoMIPS (lpj=13170256)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 27049 entries in 107 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (26339.32 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at cacbf000 (3219456 bytes)
print_constraints: dummy:
RTC time: 10:56:11, date: 04/14/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000cac6b018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331)
ACPI: SSDT 00000000cac6ca98 00303 (v01 PmRef ApIst 00003000 INTL 20100331)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100331)
ACPI: SSDT 00000000cac6ad98 00119 (v01 PmRef ApCst 00003000 INTL 20100331)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100331)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xf7ffffff]
pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: [8086:0112] type 0 class 0x000380
pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x6000-0x603f]
pci 0000:00:14.0: [8086:1e31] type 0 class 0x000c03
pci 0000:00:14.0: reg 10: [mem 0xf0b20000-0xf0b2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:16.0: [8086:1e3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xf0b35000-0xf0b3500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:19.0: [8086:1503] type 0 class 0x000200
pci 0000:00:19.0: reg 10: [mem 0xf0b00000-0xf0b1ffff]
pci 0000:00:19.0: reg 14: [mem 0xf0b3b000-0xf0b3bfff]
pci 0000:00:19.0: reg 18: [io 0x6080-0x609f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: [8086:1e2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xf0b3a000-0xf0b3a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:1e20] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf0b30000-0xf0b33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:1e10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:1e18] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: [8086:1e1a] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.7: [8086:1e1e] type 1 class 0x000604
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xf0b39000-0xf0b393ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.0: [8086:1e44] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1e02] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x60a8-0x60af]
pci 0000:00:1f.2: reg 14: [io 0x60b4-0x60b7]
pci 0000:00:1f.2: reg 18: [io 0x60a0-0x60a7]
pci 0000:00:1f.2: reg 1c: [io 0x60b0-0x60b3]
pci 0000:00:1f.2: reg 20: [io 0x6060-0x607f]
pci 0000:00:1f.2: reg 24: [mem 0xf0b38000-0xf0b387ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xf0b34000-0xf0b340ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [1002:679a] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xf0a00000-0xf0a3ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0x5000-0x50ff]
pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.1: [1002:aaa0] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xf0a40000-0xf0a43fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xf0a00000-0xf0afffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: [8086:10d3] type 0 class 0x000200
pci 0000:03:00.0: reg 10: [mem 0xf0900000-0xf091ffff]
pci 0000:03:00.0: reg 14: [mem 0xf0800000-0xf08fffff]
pci 0000:03:00.0: reg 18: [io 0x4000-0x401f]
pci 0000:03:00.0: reg 1c: [mem 0xf0920000-0xf0923fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.4: bridge window [mem 0xf0800000-0xf09fffff]
pci 0000:04:00.0: [10b5:8606] type 1 class 0x000604
pci 0000:04:00.0: reg 10: [mem 0xf0700000-0xf071ffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 04-0b]
pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.5: bridge window [mem 0xf0500000-0xf07fffff]
pci 0000:05:01.0: [10b5:8606] type 1 class 0x000604
pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
pci 0000:05:01.0: PME# disabled
pci 0000:05:04.0: [10b5:8606] type 1 class 0x000604
pci 0000:05:04.0: PME# supported from D0 D3hot D3cold
pci 0000:05:04.0: PME# disabled
pci 0000:05:05.0: [10b5:8606] type 1 class 0x000604
pci 0000:05:05.0: PME# supported from D0 D3hot D3cold
pci 0000:05:05.0: PME# disabled
pci 0000:05:07.0: [10b5:8606] type 1 class 0x000604
pci 0000:05:07.0: PME# supported from D0 D3hot D3cold
pci 0000:05:07.0: PME# disabled
pci 0000:05:09.0: [10b5:8606] type 1 class 0x000604
pci 0000:05:09.0: PME# supported from D0 D3hot D3cold
pci 0000:05:09.0: PME# disabled
pci 0000:04:00.0: PCI bridge to [bus 05-0b]
pci 0000:04:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:04:00.0: bridge window [mem 0xf0500000-0xf06fffff]
pci 0000:05:01.0: PCI bridge to [bus 06-06]
pci 0000:07:00.0: [1b4b:9172] type 0 class 0x000106
pci 0000:07:00.0: reg 10: [io 0x3018-0x301f]
pci 0000:07:00.0: reg 14: [io 0x3024-0x3027]
pci 0000:07:00.0: reg 18: [io 0x3010-0x3017]
pci 0000:07:00.0: reg 1c: [io 0x3020-0x3023]
pci 0000:07:00.0: reg 20: [io 0x3000-0x300f]
pci 0000:07:00.0: reg 24: [mem 0xf0600000-0xf06001ff]
pci 0000:07:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:07:00.0: PME# supported from D3hot
pci 0000:07:00.0: PME# disabled
pci 0000:05:04.0: PCI bridge to [bus 07-07]
pci 0000:05:04.0: bridge window [io 0x3000-0x3fff]
pci 0000:05:04.0: bridge window [mem 0xf0600000-0xf06fffff]
pci 0000:05:05.0: PCI bridge to [bus 08-08]
pci 0000:05:07.0: PCI bridge to [bus 09-09]
pci 0000:0a:00.0: [1283:8892] type 1 class 0x000604
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:00.0: PME# disabled
pci 0000:05:09.0: PCI bridge to [bus 0a-0b]
pci 0000:05:09.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:0b:02.0: [104c:8023] type 0 class 0x000c00
pci 0000:0b:02.0: reg 10: [mem 0xf0504000-0xf05047ff]
pci 0000:0b:02.0: reg 14: [mem 0xf0500000-0xf0503fff]
pci 0000:0b:02.0: supports D1 D2
pci 0000:0b:02.0: PME# supported from D0 D1 D2 D3hot
pci 0000:0b:02.0: PME# disabled
pci 0000:0a:00.0: PCI bridge to [bus 0b-0b] (subtractive decode)
pci 0000:0a:00.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:0a:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:0a:00.0: bridge window [mem 0xf0500000-0xf05fffff] (subtractive decode)
pci 0000:0a:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:0a:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:0c:00.0: [1b4b:9172] type 0 class 0x000106
pci 0000:0c:00.0: reg 10: [io 0x2018-0x201f]
pci 0000:0c:00.0: reg 14: [io 0x2024-0x2027]
pci 0000:0c:00.0: reg 18: [io 0x2010-0x2017]
pci 0000:0c:00.0: reg 1c: [io 0x2020-0x2023]
pci 0000:0c:00.0: reg 20: [io 0x2000-0x200f]
pci 0000:0c:00.0: reg 24: [mem 0xf0400000-0xf04001ff]
pci 0000:0c:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:0c:00.0: PME# supported from D3hot
pci 0000:0c:00.0: PME# disabled
pci 0000:00:1c.7: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.7: bridge window [mem 0xf0400000-0xf04fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
_OSC request data:1 1f 1f
pci0000:00: Requesting ACPI _OSC control (0x1d)
_OSC request data:1 0 1d
pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d000 - 000000000009ffff
reserve RAM buffer: 00000000cac0d000 - 00000000cbffffff
reserve RAM buffer: 00000000cb000000 - 00000000cbffffff
reserve RAM buffer: 000000042f600000 - 000000042fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xd0000000-0xf7ffffff window]
pnp 00:00: [mem 0x00010000-0x0001ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xfed00000-0xfed003ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [io 0x00f0]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x002e-0x002f]
pnp 00:04: [io 0x004e-0x004f]
pnp 00:04: [io 0x0061]
pnp 00:04: [io 0x0063]
pnp 00:04: [io 0x0065]
pnp 00:04: [io 0x0067]
pnp 00:04: [io 0x0070]
pnp 00:04: [io 0x0080]
pnp 00:04: [io 0x0092]
pnp 00:04: [io 0x00b2-0x00b3]
pnp 00:04: [io 0x0680-0x069f]
pnp 00:04: [io 0x1000-0x100f]
pnp 00:04: [io 0xffff]
pnp 00:04: [io 0xffff]
pnp 00:04: [io 0x0400-0x0453]
pnp 00:04: [io 0x0458-0x047f]
pnp 00:04: [io 0x0500-0x057f]
pnp 00:04: [io 0x164e-0x164f]
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] has been reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0070-0x0077]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0454-0x0457]
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: [io 0x0810-0x081f]
pnp 00:07: [irq 3]
pnp 00:07: [io 0x0800-0x080f]
pnp 00:07: Plug and Play ACPI device, IDs NTN0530 (active)
pnp 00:08: [mem 0xf8000000-0xffffffff]
system 00:08: [mem 0xf8000000-0xffffffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0x00000000-0x0009cfff]
system 00:09: [mem 0x00000000-0x0009cfff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
Freeing initrd memory: 13844k freed
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:07:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:0c:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
PCI: max bus depth: 4 pci_try_num: 5
pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0c00000-0xf0cfffff pref]
pci 0000:00:1c.7: BAR 15: assigned [mem 0xf0d00000-0xf0dfffff pref]
pci 0000:00:1c.7: BAR 15: assigned [mem 0xf0d00000-0xf0ffffff pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xf1000000-0xf12fffff pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xf1300000-0xf14fffff 64bit pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf1500000-0xf16fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf1700000-0xf18fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x7000-0x7fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf0a60000-0xf0a7ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xf0a00000-0xf0afffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.0: bridge window [mem 0xf1500000-0xf16fffff]
pci 0000:00:1c.0: bridge window [mem 0xf1700000-0xf18fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.4: bridge window [mem 0xf0800000-0xf09fffff]
pci 0000:00:1c.4: bridge window [mem 0xf1300000-0xf14fffff 64bit pref]
pci 0000:04:00.0: BAR 15: assigned [mem 0xf1000000-0xf10fffff pref]
pci 0000:05:04.0: BAR 15: assigned [mem 0xf1000000-0xf10fffff pref]
pci 0000:05:01.0: PCI bridge to [bus 06-06]
pci 0000:07:00.0: BAR 6: assigned [mem 0xf1000000-0xf101ffff pref]
pci 0000:05:04.0: PCI bridge to [bus 07-07]
pci 0000:05:04.0: bridge window [io 0x3000-0x3fff]
pci 0000:05:04.0: bridge window [mem 0xf0600000-0xf06fffff]
pci 0000:05:04.0: bridge window [mem 0xf1000000-0xf10fffff pref]
pci 0000:05:05.0: PCI bridge to [bus 08-08]
pci 0000:05:07.0: PCI bridge to [bus 09-09]
pci 0000:0a:00.0: PCI bridge to [bus 0b-0b]
pci 0000:0a:00.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:05:09.0: PCI bridge to [bus 0a-0b]
pci 0000:05:09.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:04:00.0: PCI bridge to [bus 05-0b]
pci 0000:04:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:04:00.0: bridge window [mem 0xf0500000-0xf06fffff]
pci 0000:04:00.0: bridge window [mem 0xf1000000-0xf10fffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-0b]
pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.5: bridge window [mem 0xf0500000-0xf07fffff]
pci 0000:00:1c.5: bridge window [mem 0xf1000000-0xf12fffff pref]
pci 0000:0c:00.0: BAR 6: assigned [mem 0xf0d00000-0xf0d1ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.7: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:1c.7: bridge window [mem 0xf0d00000-0xf0ffffff pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:04:00.0: setting latency timer to 64
pci 0000:05:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:05:01.0: setting latency timer to 64
pci 0000:05:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:05:04.0: setting latency timer to 64
pci 0000:05:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:05:05.0: setting latency timer to 64
pci 0000:05:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:05:07.0: setting latency timer to 64
pci 0000:05:09.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:05:09.0: setting latency timer to 64
pci 0000:0a:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:0a:00.0: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xf7ffffff]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xf0a00000-0xf0afffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf16fffff]
pci_bus 0000:02: resource 2 [mem 0xf1700000-0xf18fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf09fffff]
pci_bus 0000:03: resource 2 [mem 0xf1300000-0xf14fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xf0500000-0xf07fffff]
pci_bus 0000:04: resource 2 [mem 0xf1000000-0xf12fffff pref]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xf0500000-0xf06fffff]
pci_bus 0000:05: resource 2 [mem 0xf1000000-0xf10fffff pref]
pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:07: resource 1 [mem 0xf0600000-0xf06fffff]
pci_bus 0000:07: resource 2 [mem 0xf1000000-0xf10fffff pref]
pci_bus 0000:0a: resource 1 [mem 0xf0500000-0xf05fffff]
pci_bus 0000:0b: resource 1 [mem 0xf0500000-0xf05fffff]
pci_bus 0000:0b: resource 5 [mem 0xf0500000-0xf05fffff]
pci_bus 0000:0c: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0c: resource 1 [mem 0xf0400000-0xf04fffff]
pci_bus 0000:0c: resource 2 [mem 0xf0d00000-0xf0ffffff pref]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:14.0: PCI INT A disabled
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800c6bfb000 - ffff8800cabfb000
software IO TLB at phys 0xc6bfb000 - 0xcabfb000
Simple Boot Flag at 0x47 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1334400974.704:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 31897
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:04:00.0: setting latency timer to 64
pcieport 0000:04:00.0: irq 41 for MSI/MSI-X
pcieport 0000:05:01.0: setting latency timer to 64
pcieport 0000:05:01.0: irq 42 for MSI/MSI-X
pcieport 0000:05:04.0: setting latency timer to 64
pcieport 0000:05:04.0: irq 43 for MSI/MSI-X
pcieport 0000:05:05.0: setting latency timer to 64
pcieport 0000:05:05.0: irq 44 for MSI/MSI-X
pcieport 0000:05:07.0: setting latency timer to 64
pcieport 0000:05:07.0: irq 45 for MSI/MSI-X
pcieport 0000:05:09.0: setting latency timer to 64
pcieport 0000:05:09.0: irq 46 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf0b38000 port 0xf0b38100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xf0b38000 port 0xf0b38180 irq 47
ata3: SATA max UDMA/133 abar m2048@0xf0b38000 port 0xf0b38200 irq 47
ata4: SATA max UDMA/133 abar m2048@0xf0b38000 port 0xf0b38280 irq 47
ata5: SATA max UDMA/133 abar m2048@0xf0b38000 port 0xf0b38300 irq 47
ata6: SATA max UDMA/133 abar m2048@0xf0b38000 port 0xf0b38380 irq 47
ahci 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ahci 0000:07:00.0: irq 48 for MSI/MSI-X
ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
ahci 0000:07:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xf0600000 port 0xf0600100 irq 48
ata8: SATA max UDMA/133 abar m512@0xf0600000 port 0xf0600180 irq 48
ahci 0000:0c:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:0c:00.0: irq 49 for MSI/MSI-X
ahci 0000:0c:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0c:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
ahci 0000:0c:00.0: setting latency timer to 64
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xf0400000 port 0xf0400100 irq 49
ata10: SATA max UDMA/133 abar m512@0xf0400000 port 0xf0400180 irq 49
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0b3a000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0b39000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 16, io mem 0xf0b20000
xhci_hcd 0000:00:14.0: irq 50 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 8:987:931
rtc_cmos 00:05: setting system clock to 2012-04-14 10:56:15 UTC (1334400975)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 3 ports detected
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2.00: ATA-9: OCZ-VERTEX3, 2.06, max UDMA/133
ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1: SATA link down (SStatus 0 SControl 300)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.06 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1608k freed
Freeing unused kernel memory: 1196k freed
udevd[113]: starting version 175
e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 51 for MSI/MSI-X
firewire_ohci 0000:0b:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
firewire_ohci 0000:0b:02.0: setting latency timer to 64
firewire_ohci: Added fw-ohci device 0000:0b:02.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
usb 4-4: new SuperSpeed USB device number 3 using xhci_hcd
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
hub 4-4:1.0: USB hub found
hub 4-4:1.0: 3 ports detected
Refined TSC clocksource calibration: 3292.522 MHz.
Switching to clocksource tsc
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:7a:29:e0
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
e1000e 0000:03:00.0: Disabling ASPM L0s
e1000e 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:03:00.0: setting latency timer to 64
e1000e 0000:03:00.0: (unregistered net_device): Failed to initialize MSI-X interrupts. Falling back to MSI interrupts.
e1000e 0000:03:00.0: irq 52 for MSI/MSI-X
usb 1-1: new high-speed USB device number 2 using ehci_hcd
e1000e 0000:03:00.0: (unregistered net_device): The NVM Checksum Is Not Valid
e1000e 0000:03:00.0: PCI INT A disabled
e1000e: probe of 0000:03:00.0 failed with error -5
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
firewire_core: created device fw0: GUID 00224dffff7d4046, S400
usb 2-1: new high-speed USB device number 2 using ehci_hcd
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[415]: starting version 175
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
udevd[435]: renamed network interface eth0 to eth2
usb 3-1: new high-speed USB device number 2 using xhci_hcd
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 3 ports detected
usb 3-2: new full-speed USB device number 3 using xhci_hcd
usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-4: new high-speed USB device number 4 using xhci_hcd
hub 3-4:1.0: USB hub found
hub 3-4:1.0: 3 ports detected
usb 1-1.6: new full-speed USB device number 3 using ehci_hcd
hub 1-1:1.0: unable to enumerate USB device on port 6
usb 3-1.2: new full-speed USB device number 5 using xhci_hcd
usb 3-1.3: new full-speed USB device number 6 using xhci_hcd
usb 1-1.6: new full-speed USB device number 4 using ehci_hcd
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 5 ep 0 with no TDs queued?
Adding 16720080k swap on /dev/sda3. Priority:-1 extents:1 across:16720080k SS
mei: module is from the staging directory, the quality is unknown, you have been warned.
mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 52 for MSI/MSI-X
lp: driver loaded but no devices found
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
input: ELAN USB KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input1
generic-usb 0003:0566:3015.0001: input,hidraw0: USB HID v1.10 Keyboard [ELAN USB KEYBOARD] on usb-0000:00:14.0-2/input0
wmi: Mapper loaded
generic-usb: probe of 0003:0566:3015.0002 failed with error -22
input: Razer Razer Salmosa as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input2
generic-usb 0003:1532:0012.0003: input,hidraw1: USB HID v1.11 Mouse [Razer Razer Salmosa] on usb-0000:00:14.0-1.3/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input3
generic-usb 0003:1532:0101.0004: input,hidraw2: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1a.0-1.6/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input4
generic-usb 0003:1532:0101.0005: input,hidraw3: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:1a.0-1.6/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for FTDI USB Serial Device
ftdi_sio 3-1.2:1.0: FTDI USB Serial Device converter detected
usb 3-1.2: Detected FT232RL
usb 3-1.2: Number of endpoints 2
usb 3-1.2: Endpoint 1 MaxPacketSize 64
usb 3-1.2: Endpoint 2 MaxPacketSize 64
usb 3-1.2: Setting MaxPacketSize 64
usb 3-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[fglrx] Maximum main memory to use for locked dma buffers: 15579 MBytes.
[fglrx] vendor: 1002 device: 679a count: 1
[fglrx] ioport: bar 4, base 0x5000, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
acpi device:3d: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
type=1400 audit(1334400988.615:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=570 comm="apparmor_parser"
type=1400 audit(1334400988.615:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=599 comm="apparmor_parser"
type=1400 audit(1334400988.615:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=570 comm="apparmor_parser"
type=1400 audit(1334400988.615:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=599 comm="apparmor_parser"
type=1400 audit(1334400988.615:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=570 comm="apparmor_parser"
type=1400 audit(1334400988.615:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=599 comm="apparmor_parser"
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
[drm] Initialized drm 1.1.0 20060810
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
lirc_dev: IR Remote Control driver registered, major 247
IR LIRC bridge handler initialized
Registered IR keymap rc-rc6-mce
input: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:07/rc/rc0/input6
rc0: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:07/rc/rc0
input: MCE IR Keyboard/Mouse (nuvoton-cir) as /devices/virtual/input/input7
rc rc0: lirc_dev: driver ir-lirc-codec (nuvoton-cir) registered at minor = 0
nuvoton_cir: driver has been successfully loaded
pci 0000:00:02.0: irq 54 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
hda_codec: ALC898: BIOS auto-probing.
HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
snd_hda_intel 0000:01:00.1: irq 55 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: setting latency timer to 64
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
Too many HDMI devices
hda-codec: out of range cmd 0:0:ff90:707:0
hda-codec: out of range cmd 0:0:ff90:708:85
hda-codec: out of range cmd 0:0:c80:707:0
hda-codec: out of range cmd 0:0:c80:708:8a
hda-codec: out of range cmd 0:0:ff90:f00:c
hda-codec: out of range cmd 0:0:ff90:709:0
hda-codec: out of range cmd 0:0:ff90:f09:0
hda-codec: out of range cmd 0:0:c80:f00:c
hda-codec: out of range cmd 0:0:c80:709:0
hda-codec: out of range cmd 0:0:c80:f09:0
hda-codec: out of range cmd 0:0:e0:f0d:0
HDMI status: Codec=0 Pin=2 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=9 Presence_Detect=0 ELD_Valid=0
HDMI status: Codec=0 Pin=65424 Presence_Detect=1 ELD_Valid=1
hda-codec: out of range cmd 0:0:ff90:f2e:8
hda_codec: cannot build controls for #0 (error -16)
hda_codec: cannot revert codec
snd_hda_intel 0000:01:00.1: PCI INT B disabled
snd_hda_intel: probe of 0000:01:00.1 failed with error -16
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90017900000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
init: failsafe main process (806) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1334400993.651:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=906 comm="apparmor_parser"
type=1400 audit(1334400993.651:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=906 comm="apparmor_parser"
type=1400 audit(1334400993.655:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=915 comm="apparmor_parser"
type=1400 audit(1334400993.655:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=916 comm="apparmor_parser"
type=1400 audit(1334400993.655:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=916 comm="apparmor_parser"
type=1400 audit(1334400993.655:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=916 comm="apparmor_parser"
type=1400 audit(1334400993.659:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=921 comm="apparmor_parser"
type=1400 audit(1334400993.659:15): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=921 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1334400993.659:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=920 comm="apparmor_parser"
type=1400 audit(1334400993.659:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=920 comm="apparmor_parser"
e1000e 0000:00:19.0: irq 51 for MSI/MSI-X
fglrx_pci 0000:01:00.0: irq 55 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1250
[fglrx] Firegl kernel thread PID: 1251
[fglrx] Firegl kernel thread PID: 1252
[fglrx] IRQ 55 Enabled
e1000e 0000:00:19.0: irq 51 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth2: link is not ready
ADDRCONF(NETDEV_UP): eth2: link is not ready
[fglrx] Gart USWC size:1280 M.
[fglrx] Gart cacheable size:508 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[fglrx] Reserved FB block: Unshared offset:fff8000, size:8000
[fglrx] Reserved FB block: Unshared offset:bfff4000, size:c000
e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0: eth2: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 5 ep 0 with no TDs queued?
eth2: no IPv6 routers present